Created on 11.04

Solar Panel Lifespan: Degradation, Warranty, and Long-Term Output

Before putting a replacement date against an array, ask what would make the owner stop using it. A warranty ending is one event. An unsafe condition is another. A loss that makes continued operation unattractive is another again. I would keep those questions separate in a solar panel lifespan review. They lead to different evidence and, quite possibly, different work.
There may still be useful service left when a 25-year warranty runs out. You need a basis for saying so about this array, though. Pull out the model records and commissioning information, then the inspection findings and output history. Can you trace what changed? Has anyone investigated it? I would want those answers in hand before discussing a replacement purchase.

Solar Panel Lifespan Begins With the Owner's Requirement

Get the owner's requirement onto paper: the intended remaining use of the site and the job the array must do. You now have a period over which to compare the options. Ask about roof work and other building plans while that requirement is being written. Where the answer is still provisional, say so in the model. It is easy to lose that qualification as a proposal passes between people.
How far do the inspection findings take you towards meeting that requirement? Mark anything still awaiting a technical answer, then name who will obtain it. Who has authority to approve the work? Have the warranty to hand during the review; its contractual conditions still need reading. Calling everything “end of life” loses the distinction between a technical finding, an economic choice and an expired contract.

Give the Degradation Figure a Source

Look at the numbers in the proposal before accepting the forecast. The Department of Energy's PV performance guidance uses about 0.5% annual degradation as a general reference. Read that with its guidance on comparing actual and expected production. What solar-resource and temperature information supports the comparison for this site? A percentage copied into a spreadsheet cannot answer that.
Trace the entries in a degradation table back to their documents. Warranty figures should carry the model and version, with the first-year allowance shown apart from the later annual allowances. You are reading a contractual power floor under particular conditions. Keep the site's recorded energy in its own comparison. I would query a table called “average degradation” if the evidence behind it were selected warranty documents. It needs a different label or different evidence.

Investigate the Output You Are Missing

Put the monitoring record beside the alarm and maintenance history. Were there inverter outages? Has shading changed? Look for cleaning work and any recorded change in output afterwards. For the solar panel lifespan decision, ask the qualified service team to work through what remains unexplained. You can use DOE's performance and maintenance guidance when assembling the brief for that team. Ask them to explain which inspections or electrical tests the symptoms call for.
Have the findings identify the modules or strings examined. Keep the proposed remedy and the check after the work with those findings. For example, cleaning a hypothetical array may recover some of its missing output. Record that recovery as evidence about soiling. It does not demonstrate that permanent aging has reversed. Do not lose the distinction when the figures move into the replacement proposal.
Two people in hard hats hold papers beside a ground-mounted solar array.

Price the Work You Would Actually Authorize

I would prepare the cost enquiry around the work that could be authorized. These notes give the technical reviewer and buyer a shared starting point:
Option
Evidence to request
Cost or constraint to include
Continue operating
Inspection findings and output compared with an appropriate baseline
Maintenance, access and the remaining use of the site
Repair a localized fault
Fault location, proposed remedy and a check after the work
Labor, compatible parts, transport and downtime
Replace selected modules
Affected module list and approval of electrical and mechanical compatibility
String configuration, connectors, mounting and handling
Repower or retire the array
Findings on equipment condition; options assessed for this project
Allow for removal, redesign, installation, downtime and the route for removed equipment
Use the agreed remaining project period for every scope. Then read through each offer as a list of work: access, removal, transport, installation, downtime. What has been priced, and what has been left for somebody else? Have the building owner read the proposed roof schedule. For a ground-mounted array, include the existing structure and electrical layout in the design review pack. The replacement scope should wait for that review.

A New Module Needs an Approved Fit

Give the supplier enough information to recognize the equipment you are trying to replace: the module code, its datasheet, photographs of the label and connectors, and the quantity. Pass the offered replacement to the responsible designer. Will its dimensions and mounting requirements fit? Do its electrical characteristics fit the string and inverter arrangement? Obtain a written answer. If the supplier changes the proposed model, send that model back through approval.
LANERGY's solar module product rangeis a place to begin the model enquiry. The version offered still needs its own datasheet and supporting documents. Write the substitution approval route into the enquiry, so a changed offer comes back to the right person. Keep their approval with the order. LANERGY's role is supplying and exporting photovoltaic modules. Purchase obligations and warranty coverage need to be established from the manufacturer's documents and sales contract. If those leave a question unanswered, return it to the relevant party for confirmation.
A gloved hand at the edge of a solar module above a metal mounting rail.

What Goes Into the Solar Panel Lifespan File?

Take away the meeting notes for a moment and try following the purchase decision from its evidence. I would keep the following records together so that another reviewer can do the same:
  • Datasheets identifying both the installed and proposed module codes.
  • Commissioning information, module identifiers and inspection findings.
  • Monitoring evidence, the comparison basis and faults already investigated.
  • The responsible technical party's written compatibility approval.
  • The applicable warranty document, named issuer and claim procedure.
  • The quoted allocation of removal, freight, installation and disposal work.
Add the receipt check to the purchase scope. Who receives the shipment and checks the codes and quantities? How will visible transport damage or another discrepancy be recorded before installation? Keep requests for outstanding documents beside the order under review. Contact LANERGY with the existing equipment details and intended scope for order-specific document questions. State what still needs confirming about warranty or service scope when you send it.

Include the Destination in the Removal Scope

There is more than one route through the end of a project's service. DOE's end-of-life resources cover continued operation as well as refurbishment, repowering and decommissioning. Read across those choices before settling the removal brief. The assessment needs to show why the chosen route suits the equipment and the owner's costs.
Put destinations against the equipment in the removal brief: assessment for reuse, recycling or disposal. Before accepting a price, ask the relevant contractor what local requirements and acceptance conditions apply. Who provides packaging? Who arranges collection? Get the answers and the allocation of responsibility into the quoted scope. Working equipment still needs the relevant checks before resale or export; a power reading does not establish its suitability for either.

Close the Review With an Action

Before closing the solar panel lifespan file, try using it to prepare the work instruction. Can you identify the equipment staying on site, the repairs and the removals? Put the owner's decision beside the findings and comparable costs. Add the selected model documents, warranty and technical approvals. An EPC or supplier taking over the order should be able to follow what was agreed without having to reconstruct the discussions.
Lanergy.png

Need help? We’re here 24/7.

Icon_mask-group.svg

Newsletter

Get solutions, straight to your inbox.

Phone

Email

+353 87 499 8229

+86 18761617164

Address

Main St, Urlingford, Co.Kilkenny, E41YD98, Ireland

© IRISH SOLAR ENERGY PREMIER LIMITED All Rights Reserved

Company

Solutions

Resources

Email
WhatsApp